As a used Honda Civic owner in Port Moody or Burnaby, it is essential to understand the oil life indicator on used cars and how to reset it with an oil change. The oil life indicator helps you determine when you need an oil change in your car. If you are not familiar with the oil life indicator, it can be confusing to know when to change the oil. This article will discuss resetting your used Honda Civic oil life in simple steps.

Also read about:

Starting Your Used Honda Civic with a Key – FAQ

Pros and Cons of DIY vs Professional Oil Filter Changes

10 Steps to change your car’s oil filter

Understanding the Honda Civic Oil Life Indicator

The oil life indicator is a feature that helps you determine when it is time for an oil change. It is a system that calculates the engine’s oil life based on your driving conditions and habits. The oil life indicator is on the dashboard and will display a percentage of the remaining oil life. The percentage will decrease as you drive, and the oil life indicator will eventually reach 0%, at which time you should perform an oil change. 

It is essential to understand that the oil life indicator does not measure the oil level or the oil pressure in used cars. It simply estimates the remaining oil life before you need to do an oil change. Therefore, checking the oil level and pressure regularly is crucial to ensure your car is running smoothly.

Why It’s Important to Reset Your Honda Civic Oil Life

Resetting your used Honda Civic oil life indicator is crucial to ensure you do an oil change at the correct intervals. If you do not reset the oil life indicator, it will continue to count down even after changing the oil, leading to unnecessary oil changes and wasted money.

In addition, not resetting the oil life indicator can also lead to engine damage in used cars. If you continue to drive with old oil, it can cause sludge buildup, clogging the engine’s oil passages, leading to engine failure and expensive repairs on your used Honda Civic.

How to Reset Your Honda Civic Oil Life in Simple Steps

Resetting your used Honda Civic’s oil life after an oil change is a simple process that can be done in a few easy steps. Here’s how to do it:

1. Turn on the ignition without starting the engine.
2. Press the “Select/Reset” button until the oil life indicator is displayed.
3. Press and hold the “Select/Reset” button until the oil life indicator starts to blink.
4. Press and hold the “Select/Reset” button again until the oil life indicator resets to 100%.

Once you have completed these steps and done an oil change, the oil life indicator will be reset, and you can accurately measure the remaining oil life.

Remote Starting Your Honda Civic: Tips and Tricks

Remote starting your used Honda Civic is a convenient feature that allows you to start your car from a distance. To use this feature on used cars, you must have a remote starter installed in your vehicle. Here are some tips and tricks to get the most out of your remote starter:

1. Make sure that your car is in a safe and secure location before using the remote starter.
2. Do not leave your car unattended while it is running.
3. Remember that the remote starter will only run the engine and not the accessories, such as the heater or air conditioner.
4. Be aware of your local laws regarding remote starters, as some states restrict their use.

Used Honda Civic Frequently Asked Questions

How Much Does a Honda Civic Weigh?

The weight can vary depending on the model and the year. On average, a Honda Civic weighs between 2,800 and 3,100 pounds. A car’s weight can impact its performance, fuel efficiency, and handling. Therefore, it is essential to consider the car’s weight when purchasing a used Honda Civic.

How Long Does a Honda Civic Last?

The lifespan can vary depending on the model, maintenance, and driving conditions. However, on average, a Honda Civic can last up to 300,000 km or more with proper maintenance. Regular oil changes, tire rotations, and tune-ups can help extend the life of your used Honda Civic.

How to Open the Hood of Your Honda Civic

Opening the hood is a simple process that can be done in a few easy steps. Here’s how to do it:

1. Locate the hood release lever, which is usually located on the left side of the driver’s footwell.
2. Pull the hood release lever towards you.
3. Go to the front of the car and locate the secondary hood release, usually in the center of the hood.
4. Pull the secondary hood release towards you, and the hood will pop open.

Where Is the Honda Civic Made?

Honda Civics are manufactured in various locations worldwide, including the United States, Canada, Japan, and the United Kingdom. The manufacturer’s location can vary depending on the model and year of the car. It is important to note that the location of manufacture can impact the price of the vehicle and its availability in certain regions.

Resetting the oil life indicator in your Civic vehicle is a simple process that can help you save money and prevent engine damage. It is important to understand the oil life indicator on used cars and how to reset it to ensure that you do an oil change at the correct intervals. Understanding your used Honda Civic’s features and specifications can help you get the most out of used cars in Port Moody and Burnaby.